![]() |
Magnetic Pickups and Speed Sensors Dynalco was started in 1968, with three products and a goal of producing engineered solutions for the oil and gas industries. In the 47 years since, Dynalco has become a worldwide industry leader, recognized for its high-quality instruments and controls used in the chemical, marine, mining, oil & gas and power industries.
All of Dynalco speed sensors are backed by a lifetime guarantee. Customers have piece of mind knowing their cost effective and reliable offering will operate in dirty, harsh and hazardous environments. Useful links: Hall Effect, TTL output sensors, IECEx approved
This standard variable reluctance magnetic pickup has standard sensitivity which makes it best suited for high speed (>500 rpm), large gear (>12 inch diam.) applications. It has a standard reach (1.125inches) and a 5/8-18 thread.
This standard variable reluctance magnetic pickup has standard sensitivity which makes it best suited for high speed (>500 rpm), large gear (>12 inch diam.) applications. It has an extra long reach (6 inches) and a 5/8-18 thread.
This standard magnetic pickup has standard sensitivity which makes it best suited for high speed (>500 rpm), large gear (>12 inch diam.) applications. It has a standard reach (1.125inches) and a 5/8-18 thread.
This magnetic pickup has an explosion proof housing which makes it ideal for hazardous environments. It has a medium reach (1.875 inches) and 3/4-20 thread.
This standard magnetic pickup can power other instruments. It has standard sensitivity, standard reach (1.125 inches), and a 5/8-18 inch thread.
This standard magnetic pickup can power other instruments. It has standard sensitivity, standard reach (1.125 inches), and a 5/8-18 inch thread.
This standard magnetic pickup has standard sensitivity long reach (4.000inches) and a 5/8-18 thread.
This highly sensitivity magnetic pickup is well suited for lower speed (300 to 500 rpm) applications. It has long reach(4.000inches) and
This intrinsically-safe, low-output magnetic pickup has a standard reach (1.125 inches) & 5/8-18 thread
Intrinsically safe magnetic pickup with standard sensitivity, long reach (4.000inches) and a 5/8-18 thread.
This miniature magnetic pickup has standard sensitivity which is appropriate for higher speed (>500 rpm), small gear(less than 2 inch diameter) applications. It has a housing length of 1.250 inches and a 3/8-24 inch thread.
This miniature magnetic pickup is highly sensitive which makes it appropriate for lower speed (300 to 500 rpm), small gear (less than 2 inch diam.) applications. Its housing is 1.25 inches long with a 3/8-24 thread.
This standard magnetic pickup is ultra-sensitive making it appropriate for low speed (less than 300 rpm), larger gear(greater than 2 inch diam.)applications. It has a standard reach (1.125inches) and 5/8-18 thread.
This magnetic pickup has a micro-miniature housing and 14 inch leads. Its housing length is a short 0.875 inches and has a 10-32 thread. It is appropriate for small gear (less than 2 inch diam.) applications.
This standard magnetic pickup has standard sensitivity which makes it appropriate for higher speed (>500 rpm), larger gear(greater than 2 inch diam.)applications. This pickup has a medium reach (2.500 inches)and a 5/8-18 thread.
This special magnetic pickup is a low drag, flow meter sensor with thread x thread length x housing length = 5/8-18x1.125T x 2.250L. Dynalco
This highly sensitive magnetic pickup is perfect for lower speed (300 to 500 rpm), larger gear (>2 inch diam.) applications. It has a 1.75" housing length, 5/8-18 thread and includes 12 inch leads.
This magnetic pickup has an explosion proof housing which makes it ideal for hazardous environments. It is suited for use in standard temperature, mid speed (300 to 500 rpm), larger gear (>2 inch diam) applications. It has a standard reach (1.500 inches) and a 5/8-18 thread
This highly sensitive magnetic pickup makes it good for mid-speed (300 to 500 rpm), larger gear (>2 inch diam.) applications. It has a medium reach (2.500 inches) and a 5/8-18 thread
This ultra-sensitive magnetic pickup is perfect for low speed (<300 rpm), larger gear (>2 inch diam.) applications. It has a medium reach (2.500 inches) and a 5/8-18 thread.
M185 Magnetic Pick up / Speed Sensor This ultra-sensitive magnetic pickup is perfect for low speed (<300 rpm), larger gear (>2 inch diam.) applications. It has a long reach (4.000 inches) and a 5/8-18 thread.
This standard magnetic pickup has standard sensitivity which makes it appropriate for high speed (>500 rpm), larger gear (>2 inch diam.) applications. It has a medium reach (2.500 inches) and a 5/8-18 thread.
The low output of this standard magnetic pickup makes it intrinsically safe and CSA approved for use in hazardous areas. It has a standard reach (1.125 inches) and 5/8-18 thread.
The low output of this standard magnetic pickup makes it intrinsically safe and CSA approved for use in hazardous areas. It has a standard reach (1.125 inches) and 5/8-18 thread.
This ultra-sensitive magnetic pickup is perfect for low speed (<300 rpm), larger gear (>2 inch diam.) applications. It has a long reach (4.000 inches) and a 5/8-18 thread.
The zener-limited output of this magnetic pickup makes it intrinsically safe and CSA approved. It produces output even at low speed (<300 rpm), larger gear (>2 inch diam.) applications. It has a medium reach (2.5 inches) and a 5/8-18 thread.
This ultra-sensitive magnetic pickup is perfect for low speed (<300 rpm), larger gear (>2 inch diam.) applications. It has a long reach (4.000 inches) and a 5/8-18 thread.
This magnetic pickup can power other instruments. It produces output even at low speed (300 to 500 rpm) applications. It also has a long reach (4.000 inches), a 3/4-16 thread and is CSA approved.
This magnetic pickup can power other instruments. It has high sensitivity which produces output even at low speed (<300 rpm), larger gear (>2 inch diam.) applications. It has a long reach (4.000 inches), a 3/4-16 thread and is CSA approved.
The low output of this magnetic pickup makes it intrinsically safe and CSA approved. It has a long reach (4.000 inches) and a 5/8-18 thread.
The low output of this magnetic pickup makes it intrinsically safe and CSA approved. It has a long reach (4.000 inches) and a 5/8-18 thread.
This magnetic pickup can power other instruments. It produces output even at low speed (300 to 500 rpm) applications. It also has a long reach (4.000 inches), a 3/4-16 thread and is CSA approved.
This magnetic pickup has an explosion proof housing which makes it ideal for hazardous environments. It is a sensitive pickup suitable for mid-speed applications (300 to 500 rpm). It has a long reach (3.500 inches) and 3/4-20 UNEF thread.
This magnetic pickup has an explosion proof housing which makes it ideal for hazardous environments. It is a sensitive pickup suitable for mid-speed applications (300 to 500 rpm). It has a long reach (3.500 inches) and 5/8-18 thread.
This standard variable reluctance IECEx approved magnetic pickup has standard sensitivity which makes it best suited for speeds >300 rpm, large gear (>12 inch diam.). It has a choice of threaded lengths, thread type (Metrix and imperial) and electrical connections. Dual approval for IECEx Ex mb IIC and Ex ia IIC
This miniature magnetic pickup is highly sensitive which makes it appropriate for lower speed (300 to 500 rpm), small gear (less than 2 inch diam.) applications. Its housing is 1.25 inches long with a 3/8-24 thread. The pickup comes with 12 feet length of shielded cable. M343 Bi-Directional Magnetic Pickup / Speed sensor This special magnetic pickup is for exclusive use with DST-2000C, a direction-sensing tachometer. The M343 is a bi-directional, dual- output sensor with a 2.000 inch reach and 3/4-20 thread.
This special magnetic pickup is for exclusive use with DST-2000C, a direction-sensing tachometer. The M343 is a bi-directional, dual- output sensor with a 2.000 inch reach and 3/4-20 thread.
This IECEx approved magnetic pickup has an encapsulated housing which makes it ideal for hazardous environments. This active magnetic pickup has digital TTL output suitable for zero velocity applications up to 20,000 Hz.. It has a choice of threaded lengths, thread type (Metrix and imperial) and electrical connections. Dual approval for IECEx Ex mb IIC and Ex ia IIC
This active magnetic pickup has digital TTL output suitable for zero velocity applications. It has a medium reach (2.500 inches) and a 5/8-18 thread.
This active magnetic pickup has digital TTL output suitable for zero velocity applications. It has a medium reach (2.500 inches) and a 5/8-18 thread.
This active magnetic pickup has digital TTL output suitable for zero velocity applications. It has a medium reach (2.500 inches) and a 5/8-18 thread.
This active magnetic pickup is a 24 VDC version of the standard model M928, with a digital TTL output suitable for zero velocity applications. It has a medium reach (2.500 inches) and a 5/8-18 thread. |
Measurement Solutions Australia | 02 9894 4300 | sales@measurement-solutions.com |