header

Tachometers, Hourmeters, Gauges and Scanners

We offer tachometers, hourmeters, temperature gauges/meters, general purpose gauges/meters and universal input products

SPD-100 Tachometer
Magnetic pick up powered tachometer.

TACHOMETER: signal-powered, 4- digit, intrinsically safe, unlighted display

The SPD-100 is a solid- state, intrinsically safe tachometer. The gate time range (0.26 to 5.70 seconds) is field- programmable. It is well- sealed for rugged indoor and outdoor applications. It has 4-digit, unlighted, LCD display.
Dynalco

Data sheet

MTH-103E Tachometer / Hourmeter / Overspeed Trip

The MTH-103E is a newer version of the MTH-103D. The function, package size and wiring are the same although the MTH-103E has a keypad that replaces the old push button, making programming easier and quicker. This product features a  5- digit tachometer, hourmeter, and trip. The trip can be programmed to activate on overspeed, underspeed (Class C), or hours. It may be magnetic pickup or DC-powered.
Dynalco

Data sheet

UM-200 Universal Monitor - Dual Channels

The UM-200 is a fully programable universal monitor that can accept 2 analogue channels + a speed input/frequency. It has a single alarm output and a back lit display configurable to show one or all of the 3 inputs with engineering units. Differential calculations can also be perfomed on the 2 analogue channels.
Dynalco

Data sheet

UM-600 Universal Monitor - 6 Channel Monitor

The UM-600 monitors up to 6 channels of any analog signal plus engine speed and hours and provides an alarm and two different shutdown signal upon user-defined set-points being exceeded. These alarms and shutdown parameters can be set based on absolute or differential values.

It offers a user customizable graphic display that has 3 different display modes. It also offers on board data logging that can be accessed via a Modbus connection or a USB interface.
Dynalco

Data sheet

SPH-100 Tachometer with Peak Speed and Hourmeter
Magnetic pick up powered tachometer with Peak Speed memory

The SPH-100 is a solid- state, tachometer designed for steam turbines, turbochargers, and high speed applications.

The SPH-100 is field- configurable, high shock, vibration and moisture resistant. The SPH-100 will hold the last ten peak speed readings and show time/date stamps speed in real time. Configured with hourmeter for total run times
Dynalco

Data sheet

SPD-300 Tachometer with direction sensing
Used with Bi-directional magnetic pickups for indicaiton of speed and direction of rotation.

TACHOMETER: signal-powered, 4- digit

The SPD-300 is a solid- state tachometer for use with bi-directional magnetic pickups to display and indicate speed and direction of rotation. It is well- sealed for rugged indoor and outdoor applications. It has 4-digit, LCD display.
Dynalco

Data sheet

DMP-105 Panel Meter
0-1 mA input meter

The DPM-105™ displays speed, temperature, rate, or virtually any variable type, in corresponding engineering units. 0–1 mA input only. Replaces analog panel meters for greater accuracy, readability, and reliability. Use as readout for
Dynalco speed and temperature transmitters, and/or as a remote tachometer.
Dynalco

Data sheet

LMD-120A Panel meter
4-20 mA current loop powered digital indicator

4½- digit LCD, 4-20 mA current loop-powered indicator displays pressure, temperature, or any other variable proportional to the 4-20 mA input. Field-adjustable. No external power required.

3-3/8 inch diameter housing is rugged, sealed, and spray- proof for indoor or outdoor applications.
Dynalco

Data sheet

LST-100 Tachometer
Ideal for low speeds

The LST-100 is specially designed to display very low speeds. It features a field- selectable pulse rate multiplier that increases signal pulse rate by a factor of 10 or 100. It is a solid- state instrument that is well sealed for rugged indoor and outdoor applications. It has a large, unlit, 4-digit display. Gate time range: 0.26 to 5.70 seconds.
Dynalco

LST-100L Tachometer
Back lit, ideal for low speeds

The LST-100 is specially designed to display very low speeds. It features a field- selectable pulse rate multiplier that increases signal pulse rate by a factor of 10 or 100. It is a solid- state instrument that is well sealed for rugged indoor and outdoor applications. It has a large, unlit, 4-digit display. Gate time range: 0.26 to 5.70 seconds.
Dynalco

Measurement Solutions Australia | 02 9894 4300 | sales@measurement-solutions.com